Low Bed

Technical Features

CHASSIS: It is produced from automatic gas metal source machines with “I cut” highly resistible. The overloads have been taken into account in resistance calculations.

SİDE BODY: The sides and wheels are optionally covered with iron plates or wood covering.


2x12-14-16 tons carriage capacity

3x12-14-16 tons carriage capacity

4x12-14-16 tons carriage capacity

AIR SUSPENSION: There are brake linings in accordance with TSE norms and heavy service type brake levels.

BRAKE: İt has been designed in accordance with European standards. WABCO products are used in the hardware. Automatic brake ratchets, brake valves, brake fans (30 cylinder), Brake linings (394*210 mm). Shaft Brakes are equipped with EBS system. There are two replaceable and protected Brake Sockets in front of trailers.

FOOT: Double cycle mechanic foot each of which has 24 tons carriage capacity.

TIRE: The preferred size of tires: 235/70 R 17.5, 245/70 R 17.5, 295/60 R 22.5, 12 R 22.5, 315/80 R 22.5.

KING-PIN: It is produced from forged steel in accordance with 2'' SAE/DIN norms, resistible to high level of tension, ruptures. Thanks to its screw connections, it is practical to be replaced.

ELECTRIC SYSTEM: LED lighting system in accordance with ECE 76/756 regulations with 2x7+15 pins.

PAINTING: After the whole surface are cleaned with water and chemical cleaning fluid under high pressure, they are covered with phosphate and after sanding, two layers of epoxy primer is covered and the last two layers are painted with acrylic painting and the ossification in the oven is provided. They are highly resistible against chemical interactions. Optional color can be chosen from RAL codes.